Luxury in any space brings the feeling of style and sophistication, and starts from the floor up.
First Floors is a premium engineered floor, with its slightly textured surface and modern matt oil finish it is the perfect choice for interiors of distinction. With the coastal golden rays of Blackbutt, the attractive wild warmth of Spotted Gum and the deep rich tones of Roasted Peat this boutique collection offers only the finest from our Australian species.
Roasted Peat, is an Australian Hardwood that has been through a thermal modification process that uses no chemicals to permanently alter the structure of the wood fibre. This process greatly increases the stability and density of the hardwood, as well as locking in the gorgeous deep earth to chocolate brown colour tones.
First Floors Specifications
Species: Blackbutt, Spotted Gum
Core Material: Hevea
Locking System: Tongue & Groove, End Matched
Sizes: 132mm x 13.5mm, 180mm x 13.5mm
Wear layer: 4mm lamella
Length: 1,820mm & 2,130mm
Surface: Medium wire brushed texture
Coating: Osmo Polyx®-Oil The Original Hardwax Oil
Install Suitability: Glue Down, Floated
Coverage 132mm: 1,820mm – 1.922m², 2,130mm – 2.249m²
Coverage 180mm: 1,820mm – 1,966m², 2,130mm – 2,300m²
Packaging 132mm: 8 rows per box, max of 3 nested rows
Packaging 180mm: 6 rows per box, max of 2 nested rows
After Installation Maintenance Required for Blackbutt & Spotted Gum:
SECOND COAT OF OSMO POLYX®-OIL THE ORIGINAL HARDWAX OIL MUST BE APPLIED AFTER INSTALL
To ensure your First Floors oil coating is at its optimal level, it is a requirement that a second coat of Osmo Polyx®-Oil The Original Hardwax Oil is applied immediately after installation.
After thoroughly cleaning the floor, apply thinly to the clean and dry wood along the wood grain with Osmo Natural Bristle Brush, Osmo Microfiber Roller or Osmo Floor Brush 150 mm, and spread well. Allow to dry for approx. 8-10 hours with good ventilation.
Species: Roasted Peat
Core Material: Plantation Eucalyptus plywood
Locking System: Tongue and Groove, End Matched, 0.3mm eased edge
Sizes: 132mm x 15mm, 180mm x 19mm
Wear Layer: 4mm
Length: Random 600mm to 2,200mm long
Surface: Medium brush texture
Coating: WOCA Denmark UV cured Oil
Installation Suitability: Glue Down, Floated
Coverage 132mm: 1.742m²
Coverage 180mm: 1.982m²
Packaging 132mm: 6 rows per box, max of 2 nested rows
Packaging 180mm: 5 rows per box, max of 2 nested rows
After Installation Maintenance Required for Roasted Peat:
WOCA MAINTENANCE OIL MUST BE APPLIED AFTER INSTALL
To ensure your First Floors oil coating is at its optimal level, it is a requirement that WOCA Maintenance Oil is applied immediately after installation.
After thoroughly cleaning the floor, spray a fine mist of WOCA Maintenance Oil, using an appropriate spray bottle applicator. Then buff into the entire floor with a fabric/microfiber cloth. This will ensure the floor is completely sealed and add longevity to the coating.